Categorías
Productos
Incubadora para bebés recién nacidos YSBB-80S
Artículo No.: YSBB-80S
Se vende incubadora infantil recién nacida a buen precio.
| Parametros del producto | |
| Marca: | YSENMED |
| MOQ: | 1 |
| Paquete: | Paquete de madera |
| Nave de: | Guangzhou |
| Tiempo de espera: | 1-3 días |
| Personalización: | Yes |
Descripción
Incubadora para bebés recién nacidos
STANDARD COMPOSITION:
● Servo Control Mode: airtemp;
● Instant ParameterDisplaying: set temp, air temp, heat power rate;
● Audible & Visual Alarms:power failure, sensor failure, higher/lower temp, air temperature override, fan failure;
● Power failure reset memory and self-test function;
● Hood with dual slope: 4hand-ports.
Specifications of hood
Mattress to Hood: 450 mm
Observation side of hood: Two incline
Operate port: 4 (2 Iris ports)
Tubing grommets: 2
Front access panel: 826×310 mm
Mattress Tray Size: 630×360 mm
Technical Specifications:
Power requirement ≤400VA
Temperature control mode: Air servo control
Air Temp Control Range: 20℃～37℃
Temperature fluctuation: ≤0.5℃
Mattress temperature uniformity: ≤0.8℃
Temperature rise time: ≤45 min
Noise level within hood environment: ≤55dB
Alarms
Power failure alarm
Fan failure alarm
Sensor failure alarm
High air temperature alarm: +3.0℃
Low air temperature alarm: -3.0℃
Over air temperature alarm: ≤38.0℃
Operational condition
Environment temperature: +20℃～+30℃
Environment relative humidity: 5%～99%
Environment air velocity of flow: <0.3m/s
Others
Mattress tray Max. load 10kg
Transfusion pole Max. load 2kg
● Servo Control Mode: airtemp;
● Instant ParameterDisplaying: set temp, air temp, heat power rate;
● Audible & Visual Alarms:power failure, sensor failure, higher/lower temp, air temperature override, fan failure;
● Power failure reset memory and self-test function;
● Hood with dual slope: 4hand-ports.
Specifications of hood
Mattress to Hood: 450 mm
Observation side of hood: Two incline
Operate port: 4 (2 Iris ports)
Tubing grommets: 2
Front access panel: 826×310 mm
Mattress Tray Size: 630×360 mm
Technical Specifications:
Power requirement ≤400VA
Temperature control mode: Air servo control
Air Temp Control Range: 20℃～37℃
Temperature fluctuation: ≤0.5℃
Mattress temperature uniformity: ≤0.8℃
Temperature rise time: ≤45 min
Noise level within hood environment: ≤55dB
Alarms
Power failure alarm
Fan failure alarm
Sensor failure alarm
High air temperature alarm: +3.0℃
Low air temperature alarm: -3.0℃
Over air temperature alarm: ≤38.0℃
Operational condition
Environment temperature: +20℃～+30℃
Environment relative humidity: 5%～99%
Environment air velocity of flow: <0.3m/s
Others
Mattress tray Max. load 10kg
Transfusion pole Max. load 2kg
YOUR MAY ALSO LIKE ...
